Device - Sharp MX-C507P User Manual

Understanding the printer menus

Device

Preferences
Menu item
Display Language
Country/Region
Run initial setup
Off*
On
Keyboard
Keyboard Type
Displayed information
Display Text 1 (IP Address*)
Display Text 2 (Date/Time*)
Custom Text 1
Custom Text 2
Date and Time
Configure
Current Date and Time
Manually Set Date and Time
Date Format (MM‑DD‑YYYY*)
Time Format (12 hour A.M./P.M.*)
Time Zone (UTC‑5:00*)
Network Time Protocol
Enable NTP (On*)
NTP Server
Enable Authentication (None*)
Paper Sizes
U.S.*
Metric
Screen Brightness
20–100% (90*)
Flash Drive Access
Enabled*
Disabled
Audio Feedback
Button Feedback (On*)
Volume (5*)
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Set the language of the text that appears on the display.
Identify the country or region that the printer is configured to
operate.
Run the setup wizard.
Select a language as a keyboard type.
Note: All the Keyboard Type values may not appear or may
require special hardware be installed to appear.
Specify the information to appear on the home screen.
Configure the printer date and time and network time protocol.
Specify the unit of measurement for paper sizes.
Note: The country or region selected in the initial setup
wizard determines the initial paper size setting.
Adjust the brightness of the display.
Enable access to the flash drive.
•
Enable audio feedback for button presses, panel
interactions, paper loaded prompts, and error notifications.
•
Adjust the feedback volume.
29