List Of Tools; Access To The Spare Wheel; Taking Out The Wheel - CITROEN C4 Spacetourer Handbook

In the event of a breakdown

List of tools

(Depending on equipment.)
1. Wheelbrace.
For removing the wheel trim and the wheel
fastening bolts.
2. Chock to immobilise the vehicle (except
versions with manual gearbox).
3. Jack with integrated handle.
Used to raise the vehicle.
212
4. Wheel bolt cover removal tool.
Removes the wheel bolt covers on alloy
wheels.
5. Socket for the security bolts (located in
the glove box).
For adapting the wheelbrace to the special
"security" bolts.
6. Towing eye and tool to open the front
protective cover.
For more information on Towing, refer to the
corresponding section.
All of these tools are specific to your
vehicle and may vary according to the
level of equipment.
Do not use them for any other purposes.
The jack must only be used to change
a wheel with a damaged or punctured tyre.
Do not use any jack other than the one
supplied with this vehicle.
If the vehicle does not have its original jack,
contact a CITROËN dealer or a qualified
workshop to obtain the correct jack for it.
The jack meets European standards,
as defined in the Machinery Directive
2006/42/EC.
The jack does not require any
maintenance.

Access to the spare wheel

The spare wheel is located in the boot, under
the floor.

Taking out the wheel

F Loosen the central nut.
F Remove the fastening device (nut and bolt).
F Raise the spare wheel towards you from the
rear.
F Take the wheel out of the boot.