Display In The Instrument Panel; Memorising The Speed - CITROEN C4 Spacetourer Handbook

Driving
- windscreen area located in front of the
camera dirty, misted, frost-covered, snow-
covered, damaged or covered by a sticker,
- fault with the camera,
- obsolete or incorrect mapping,
- obstructed road signs (by other vehicles,
vegetation, snow),
- speed limit signs that do not conform to the
standard, are damaged or distorted.
Recommendation
In addition to Speed Limit recognition and
recommendation, the driver can select the
speed displayed as a speed setting for the
speed limiter or cruise control using the speed
limiter or cruise control memorisation button.
For more information on the Speed
limiter, Cruise control or Adaptive
cruise control, refer to the corresponding
sections.
146
Steering mounted controls
1. Select speed limiter/cruise control mode.
2. Memorise a speed setting.

Display in the instrument panel

3. Speed limit indication.
4. Memorise the speed.
5. Current speed setting.

Memorising the speed

F Switch on the speed limiter/cruise control.
Speed limiter/cruise control information is
displayed.
On detection of a sign offering a new speed
limit, the system displays the value and MEM
flashes for a few seconds to offer to make it
a new speed setting.
If there is a difference of less than 6 mph
(10 km/h) between the speed setting and
the speed displayed by the Speed Limit
recognition and recommendation, the
MEM symbol is not displayed.
Depending on the road conditions, several
speeds may be displayed.
F Make an initial press on button 2 to request
saving of the speed suggested.
A message is displayed to confirm the request.
F Press button 2 again to confirm and save
the new speed setting.
After a predetermined period, the screen
returns to the current display.