display in the instrument panel
n. Neutral
R. Reverse
1 2 3 4 5 / 6. Gears in manual mode.
AUTO. T his comes on when automated mode
is selected. It goes off when changing
to manual mode.
Moving off
F Select position n.
F Press the brake pedal fully.
F Start the engine.
n appears in the instrument panel.
If the engine does not start:
-
If n is flashing in the instrument
panel, move the gear selector to
position A, then to position n.
-
If this warning lamp
comes on, accompanied
by an audible signal and
the display of a message,
press firmly on the brake
pedal.
F Select automated mode (position A),
manual mode (position M) or reverse
(position R).
AUTO and 1, 1 or R appear in the
instrument panel.
F Release the parking brake.
F Progressively take your foot off the brake
pedal.
Depending on the type of electronic
gearbox, the vehicle may move off on
its own.
For more information, refer to the
"Creep function" section.
F Accelerate away.
Do not press the brake and clutch
pedals simultaneously. This can cause
rapid clutch wear.
111
Driving