Troubleshooting - ResMed AirFit P10 User Manual

Troubleshooting

For troubleshooting issues with HumidX/HumidX Plus, refer to the AirMini
User Guide.
Problem/possible cause
Pillows won't seal properly, mask is uncomfortable or causes red marks
Pillows or headgear may have been
fitted incorrectly or adjusted incorrectly.
One/both of the pillows are squashed or
misshapen or inner wall of one or both
pillows is incorrect.
Pillows are the wrong size.
Pillows may be dirty.
Headgear is too loose.
Component appears damaged or worn
Mask too noisy
System is leaking air.
8
Solution
Check that the nasal pillows with the left (L)
and right (R) indicators are inserted correctly.
Re-fit your mask according to the fitting
instructions. Readjust the headgear to ensure it
is fitted comfortably.
Squeeze individual pillow sides to return each
pillow to original shape.
Talk to your clinician.
Clean pillows according to the instructions.
Adjust the headgear bands or use AirFit P10
headgear clips for additional adjustment.
If your headgear comes with a buckle, pull the
headgear through the buckle.
Replace the part. Contact your local ResMed
dealer.
Refit or reposition your mask. Adjust your
headgear. Check your mask is assembled
correctly.