Connecting A Bta-2 (Dedicated Wireless Adapter) - Zoom PodTrak P8 Operation Manual

Connecting a BTA-2 (dedicated wireless adapter)

By connecting a BTA-2, audio can be input through the smartphone connection jack via Bluetooth.
Connecting
Pairing must be conducted the first time connecting.
1.
P8
While the power is off, connect the BTA-2 to the smartphone connection jack and the BTA-2 power
supply connector.
2.
P8
Turn the power on (
The LED lights white when power is being supplied to the BTA-2.
If a smartphone has already been paired, it will automatically be connected at this time.
3.
Press and hold the pairing switch until the BTA-2 LED blinks white.
This puts the BTA-2 into connection standby.
4.
Conduct connection procedures on the smartphone.
The LED will light blue when connection completes.
Disconnecting
1.
Conduct disconnection procedures on the smartphone.
This disconnects it.
2.
P8
The power should be off when disconnecting a BTA-2.
Pairing
switch
BTA-2
"Turning the power on" on page
LED
20).
27