Audio Menu; Audio - 3M X90w Operator's Manual

AUDIO Menu

AUDIO Menu
From the AUDIO menu, items shown in the table below can
be performed.
on the projector or remote control, or ENTER button on
the remote control to execute the item. Then perform it
according to the following table.
NOTE • The speaker sound may distorted or the case may be trembling
when the volume is too high or treble/bass is emphasized or WOW is activated.
In that case, make the volume reduced, bass/treble low or WOW effect to be
weakend.
Item
VOLUME
TREBLE
BASS
SRS WOW
SPEAKER

AUDIO

38
High Low
High Low
High Low
HIGH MID OFF
• SRS WOW™ accomplishes this by providing a panoramic three-
horizontal and vertical planes, and lowers the perceived bass
response well beyond the low frequency limitations of the drivers.
Adjust it depending on the user's preference.
TURN ON TURN OFF
• When the TURN ON is selected the built-in speaker works.
Allocates the audio ports.
buttons.
RGB1 RGB2
VIDEO S-VIDEO
(2) Select the audio port to be interlocked with
1 2 3 4
"M" is abbreviation of MIU. When
audio ports do not work interlocking with the input port, and any
items in AUDIO menu are invalid.
Description
adjusts the bass level.
switches the mode for SRS WOW mode.
turns the speaker function on/off.
M1-D MIU
COMPONENT
M
is selected to an input port, any
© 3M 2006. 3M™ Digital Projector X90w