Searching An Input Signal; Selecting An Aspect Ratio - 3M X90w Operator's Manual

Selecting an input signal (continued)
1. Press the VIDEO button on the remote control to select an
input for video signal.
Each time you press the button, the projector switches its
video input port as below.
COMPONENT (Y, C
when TURN ON is selected for the AUTO SEARCH item in the OPTION menu
the projector will check the COMPONENT (Y, C
is detected at the port, the projector will check other ports in above order.

Searching an input signal

1. Press the SEARCH button on the remote control.
The projector will start to check its input ports in order to
When an input is found, the projector will stop searching and display the image.
If no signal is found, the projector will return to the state selected before the
operation.
RGB 1 RGB 2
Mode" of MIU
(

Selecting an aspect ratio

1. Press the ASPECT button on the remote control.
Each time you press the button, the projector switches the mode for aspect
ratio in turn.
For an RGB or MIU signal
NORMAL
For an M1-D signal
NORMAL
For a video signal, s-video signal or component video signal
4:3 16:9
For no signal
© 3M 2006. 3M™ Digital Projector X90w
/R , C /B ) S-VIDEO
B B R R
M1-D MIU COMPONENT (Y, C
54)
.
4:3 16:9 SMALL
4:3 16:9 14:9
14:9 SMALL
VIDEO
/R , C /B
B B R R
/R , C /B
B B R
SMALL
Operating
LASER
INDICATOR
STANDBY/ON VIDEO RGB
)
MAGNIFY MY BUTTON VOLUME
ON 1
MUTE
OFF 2
FREEZE KEYSTONE SEARCH
) S-VIDEO VIDEO
R
ASPECT
19