Operating; Adjusting The Volume; Temporarily Muting The Sound; Selecting An Input Signal - 3M X90w Operator's Manual

Operating

Operating

Adjusting the volume

1. Press the VOLUME button on the remote control.
A dialog will appear on the screen to aid you in adjusting the volume.
2.
To close the dialog and complete the operation, press the
VOLUME button again. Even if you do not do anything, the
dialog will automatically disappear after a few seconds.
adjustment is disable. Please see the AUDIO item of AUDIO menu.

Temporarily muting the sound

1.
Press the MUTE button on the remote control.
A dialog will appear on the screen indicating that you have muted the sound.
To restore the sound, press the MUTE or VOLUME button.
Even if you do not do anything, the dialog will automatically
disappear after a few seconds.
always muted. Please see the AUDIO item of AUDIO menu.

Selecting an input signal

1. Press the INPUT button on the projector.
Each time you press the button, the projector switches its
input port as below.
RGB 1
VIDEO S-VIDEO
1. Press the RGB button on the remote control to select an
input port for the RGB signal.
Each time you press the button, the projector switches its RGB
input port as below.
RGB 1 RGB 2
when TURN ON is selected for the AUTO SEARCH item in the OPTION menu
the projector will check other port in above order.
(continued on next page)
18
RGB 2 M1-D
COMPONENT (Y, C
M1-D MIU
MIU
/R , C /B )
B B R R
© 3M 2006. 3M™ Digital Projector X90w
ENTER
PUSH
PAGE UP PAGE DOWN
ESC MENU RESET
POSITION AUTO
MAGNIFY MY BUTTON VOLUME
ON 1
MUTE
38)
(
POSITION AUTO
MAGNIFY MY BUTTON VOLUME
ON 1
MUTE
OFF 2
FREEZE KEYSTONE SEARCH
38)
(
LASER
INDICATOR
STANDBY/ON VIDEO RGB