command starts.
▶
DCT Unganged Mode
Ths tem s used to enable/dsable unganged mode. In unganged mode, a logcal
DIMM s ether one 64-bt DIMM.
▶
FSB/DRAM Rato
Ths tem wll allow you to adjust the rato of FSB to memory.
▶
SB to CPU Freq Auto
[Enabled]
Auto Detect HT frequency.
[Dsabled]
Manual to settng HT frequency.
▶
SB to CPU Frequency
When the SB to CPU Freq Auto set to [Dsabled], the tem wll appear. Ths tem allows
you to select the frequency from CPU to chpset.
▶
SB to CPU LnkWdth
Ths tem allows you to select the HT wdth from CPU to chpset.
▶
Auto Dsable DIMM/PCI Frequency
When set to [Enabled], the system wll remove (turn off) clocks from empty DRAM/ PCI
slots to mnmze the electromagnetc nterference (EMI).
▶
CPU Voltage
Ths tem allows you to ncrease the CPU voltage.
▶
Memory Voltage
Adjustng the memory voltage can ncrease the memory speed.
▶
NB Voltage
Adjust the North Brdge chpset voltage.
▶
VTT FSB Voltage
Adjust the VTT FSB voltage.
▶
Spread Spectrum Configuraton
Press <Enter> to enter the sub-menu and the followng screen appears.
▶
CPU/LDT Spread Spectrum
Ths settng s used to enable or dsable the CPU/LDT (HT Bus multpler) Spread
Spectrum feature.
▶
SATA Spread Spectrum
Ths settng s used to enable or dsable the SATA Spread Spectrum feature.
MS-7511
MS-7511
3-19