Retrieving A Voice Message; Shared Control - Avaya J139 Using Manual

Advanced features

Retrieving a voice message

About this task
Use this procedure to listen to your voicemail messages.. Few voicemail configuration has the
web interface to access it, please contact your administrator for more information.
Before you begin
• Ensure that the system administrator configures the voicemail for your extension.
• Obtain the user ID and password of your voicemail from your system administrator.
Procedure
1. To log in to your voicemail, press the Message button.
2. Follow the voice prompts to playback your voice messages.

Shared control

With the Shared Control feature, you can operate phones from the Avaya Workplace Client client
and use high quality audio of the phone. Shared control is supported on all the Avaya J100 Series
IP Phones models.
Phones must be registered with Avaya Aura
log in to your phone and Avaya Workplace Client in the shared control mode, you can control the
phone through Avaya Workplace Client. A shared control session might not be established if
multiple devices are registered to the same user, depending on the client implementation.
The Shared Control feature must be activated by the administrator and configured on Avaya
Workplace Client.
Note:
This feature is available only in Avaya Aura
You can perform the following tasks on the Avaya J100 Series IP Phones:
• make a call
• answer a call
• place and resume a call on hold
• mute and unmute a call
• call transfer
• conference
February 2021
®
to establish a shared control connection. When you
®
environment.
Using Avaya J139 SIP IP Phone in Avaya Aura
Comments on this document? infodev@avaya.com
®
82