Push-To-Talk; Retrieving A Voice Message; Shared Call Appearance - Avaya J159 User Manual

Push-To-Talk

With the Push-To-Talk feature, you can call another user and have your call answered
automatically.
Note:
You can make only audio calls with this feature.

Retrieving a voice message

About this task
Use this procedure to listen to your voicemail messages.
Before you begin
• Ensure that the system administrator configures the voicemail for your extension.
• Obtain the user ID and password of your voicemail from your system administrator.
Procedure
1. To log in to your voicemail, press the Message button.
2. Follow the voice prompts to playback your voice messages.

Shared call appearance

With the Shared Call Appearance (SCA) feature, your primary extension can be private or shared.
Up to three additional shared extensions can be configured to appear on your phone. All
extensions are shared with other phones connected to the same network.
Depending on the configuration of your phone, any of your shared extensions can be used to:
• Dial outgoing calls.
• Answer incoming calls.
• Perform all the usual operations on a local call, including hold, transfer, and conference.
• View the status of calls on other phones with the same shared line.
• Barge into a call on another phone with the same shared extension.
• Put local calls on private hold to block others from barging into the call.
Incoming calls to any shared extension alert all phones configured with this extension.
April 2020 Using Avaya J159 IP Phone in an Open SIP environment
Comments on this document? infodev@avaya.com
Push-To-Talk
89