For The Condenser (Products With A Condenser) - Beko DV 6110 Manual

Table of Contents

Advertisement

For the condenser (products with a
condenser)
Hot and humid air in the condenser is cooled
with the cold air from the room. Thus,
the humid air circulating in your dryer is
condensed and then pumped into the tank.
C
Clean the condenser after every 30 drying
cycles or once a month.
To clean the condenser:
1. If a drying process has been carried out,
open the door of the product and wait until
it cools down.
2. Unlock the 4 condenser locks after opening
the kick plate.
3. Pull out the condenser.
4. Clean the condenser with pressurized
water and wait until the water drains.
5. Replace the condenser with the side of it
labelled with "Top" facing upwards. Lock
the 4 condenser locks. Make sure that
the red lock on the upper right corner is
engaged securely.
6. Close the kick plate cover.
Close properly and
check the locking
latchs?
32 - EN

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents