Line Fuse Holder; Line Voltage Selector; Serial Number Plate; Power Cord Receptacle - Agilent Technologies 4349B Manual

4349B

LINE Fuse Holder

The 4349B's line fuse is selected depending on the LINE Voltage selection.

LINE Voltage Selector

The Line Voltage Selector is used to match the 4349B to the power line voltage being used. The
line voltage selections are as follows:
Voltage Selector
115V
230V

Serial Number Plate

The serial number plate gives manufacturing information about the 4349B. For details, see
Appendix A.

Power Cord Receptacle

The Power Cord Receptacle is used to plug in the power cord.

Power Cord

The 4349B is equipped with a three-conductor power cord that, when plugged into the
appropriate AC power receptacle, grounds the instrument. The o set pin on the power cord is
the safety ground.
Table 3-2. Line Voltage selection
Line Voltage
6
100/120Vac( 10%)
6
220/240Vac( 10%)
Required Fuse
UL/CSA type, Time delay 0.5A 250V
(Agilent part number 2110-0202)
UL CSA type, Time delay 0.25A 250V
(Agilent part number 2110-0201)
Function Reference 3-13