Disassembly - Denon RCD-N9 Service Manual

DISASSEMBLY

• Remove each part in the order of the arrows below.
• Reassemble removed parts in the reverse order.
Read "PrecautionsnDuringnWork" before reassembling removed parts.
•
• If wire bundles are removed or moved during adjustment or part replacement, reshape the wires after completing
the work. Failure to shape the wires correctly may cause problems such as noise.
REAR MOLD PANEL
See "DISASSEMBLY"
1. REAR MOLD PANEL
and "EXPLODEDnVIEW"
REAR MOLD PANEL
(Ref. No. of EXPLODED VIEW ： P3)
CD PCB
See "DISASSEMBLY"
6. CD PCB
and "EXPLODEDnVIEW"
CD PCB
(Ref. No. of EXPLODED VIEW ： C30)
SMPS PCB
See "DISASSEMBLY"
10. SMPS PCB
and "EXPLODEDnVIEW"
SMPS PCB
(Ref. No. of EXPLODED VIEW ： C1)
INPUT PCB
(Ref. No. of EXPLODED VIEW ： C22)
SIDE PANEL
See "DISASSEMBLY"
2. SIDE PANEL
and "EXPLODEDnVIEW"
SIDE PANEL
(Ref. No. of EXPLODED VIEW ： P2)
CD MECHA ASSY
See "DISASSEMBLY"
4. CD MECHA ASSY
and "EXPLODEDnVIEW"
CD MECHA ASSY
(Ref. No. of EXPLODED VIEW ： P13)
SHIELD CASE
See "DISASSEMBLY"
7. SHIELD CASE
and "EXPLODEDnVIEW"
SHIELD CASE
(Ref. No. of EXPLODED VIEW ： M7)
TUNER/OPTICAL PCB
See "DISASSEMBLY"
8. TUNER/OPTICAL PCB
and "EXPLODEDnVIEW"
TUNER/OPTICAL PCB
(Ref. No. of EXPLODED VIEW ： C29)
MAIN PCB
See "DISASSEMBLY"
9. MAIN PCB
and "EXPLODEDnVIEW"
DIGITAL AMP PCB
(Ref. No. of EXPLODED VIEW ： C4)
MAIN PCB
(Ref. No. of EXPLODED VIEW ： C34)
14
TOP PANEL ASSY
See "DISASSEMBLY"
3. TOP PANEL ASSY
and "EXPLODEDnVIEW"
TOP PANEL ASSY
(Ref. No. of EXPLODED VIEW ： P6/P7)
ETHERNET PCB ASSY
See "DISASSEMBLY"
5. ETHERNET PCB ASSY
and "EXPLODEDnVIEW"
SIDE PANEL
(Ref. No. of EXPLODED VIEW ： C23)
FRONT PANEL ASSY
See "DISASSEMBLY"
11. FRONT PANEL ASSY
and "EXPLODEDnVIEW"
FRONT PANEL ASSY
(Ref. No. of EXPLODED VIEW ： C24)
USB PCB
(Ref. No. of EXPLODED VIEW ： C25)