Cd Test Mode - Denon RCD-N9 Service Manual

4. CD Test mode

4.1.Operation
In "STANDBY" status, press and hold the "CURSOR o " and "VOLUME d " buttons along with the power operation but-
ton to turn on the power.
Startupndisplay
"CD Test Mode" displayed for 5 seconds.
To exit this mode, unplug the power cord.
4.2. Before starting the test
Open the tray and set the disc.
Even if the disc is, the tray must let OPEN → CLOSE.
4.3. Servo check
Press " 1 / 3 " button. Execute the following steps.
z Press and hold the " 1 / 3 " button for at least one second to proceed directly to the step in which the sub code from t
is read. Press the "INPUT" button to return to the "0 CD TEST MODE" display.
q LD ON
w FOCUS ON
e CLV ON
CD TEST MODE display(Disk loading)
" 1 / 3 "
" 1 / 3 "
" 1 / 3 "
" 1 / 3 "
26