AS-9400
User Guide
Disable only 2D Symbologies
If only 2D Symbologies feature is disabled, the scanner will not be able to read any 2D barcodes.
Scanning Mode
Trigger Mode (Default)
Scanning this bar code will enable the scanner to enter manual trigger mode.
Auto Sense Mode
Scanning this bar code will enable the scanner to enter auto sense mode.
Continuous Mode
This mode enables the engine to scan/capture, decode and transmit over and over again.
Enter Configuration
Disable only 2D Symbologies
**Trigger Mode
Automatic Scanning Mode
Continuous Scanning Mode
- 3 -
Exit Configuration