Table of Contents
Advertisement
5
Upgrading the
System
Software
1
Refer to the Security Switch 6200 Product Release Notes for the actual upgrade number.
3COM Security Switch 6200 Hardware and Software Users Guide
This chapter describes how to update your 3COM Security Switch 6200
system software.
If you are upgrading your system from a previously configured release, you do
not need to use the full system software. Instead, you can use the software
upgrade patch.
NOTE: "upgradepack-ocode-A*-1.0.0-11-2.1.4-17.shar.gz" is the upgrade pack
that enables you to upgrade from 2.1.5 to 2.x.x-x
this, complete the following:
1.
Login to your system console port as root.
2.
Change to the root directory, using the following command:
cd /root
3.
Create a directory, using the following command:
mkdir upgradepack-X.X.X-X
Where X.X.X-X, is the current software version.
4.
FTP or copy the file called cos-upgradepack-ocode-AZZZ-Y.Y.Y-Y-
X.X.X-X.shar.gz from your system Software CDROM or software
package to the /root/upgradepack-X.X.X-X.
5.
Change the directory to upgradepack-X.X.X-X, using the
following command:
cd upgradepack-X.X.X-X
Upgrading the System
Software
1
(x = 0,1,2, and so on.). To do
5-1
Advertisement
Table of Contents
