3Com 3CR13500 Software Install Manual page 8

2-2 Installing the CheckPoint FireWall-1 NG FP3 and
NG AI Software Onto Your System
Installing the
Check Point
FireWall-1 NG AI
Software
1 Refer to the 3COM Security Switch 6200 Product Release Notes for the correct software version and rpm file
name.
4 To install FireWall-1, enter the following commands:
rpm -i CPshrd-50-03.i386.rpm
rpm -i CPfw1-50-03.i386.rpm
5 Untar and install hotfixes. Refer to the Check Point website for the latest
hotfixes.
6 Run cpconfig and step through the Firewall-1 configuration. For SecureXL,
answer "yes". The VPN acceleration driver is automatically installed if an
accelerator card is installed.
For further information about the Check Point FireWall-1 installation, refer
to the Check Point FireWall-1 documentation.
To download the Check Point FireWall-1 NG AI software onto your system,
complete the following.
NOTE: Steps 2, 3, and 4, of the following procedure may have already been
performed by manufacturing.
1 Log into your system as root.
2 Locate the file app-firewallng-AI-x.x.x.x.7xCOS.i686.rpm
following command at the root prompt:
[root@xxxxx rpm]# rpm -i app-firewallng-AI-
x.x.x.x.7xCOS.i686.rpm
You must now install the application as specified by Check
Point. The vendor files have been copied to /usr/os/apps/CPFW-
1_5_0.
3 Change to the /usr/os/apps/ directory, using the following command:
cd /usr/os/apps/CPFW-1_5_0
The following rpms and hotfixes are contained in this directory:
CPdtps-50-04.i386.rpm
CPfw1-50-04.i386.rpm
CPrtm-50-04.i386.rpm
CPshrd-50-04.i386.rpm
4 To install FireWall-1 NG AI, complete the following:
rpm -i CPshrd-50-04.i386.rpm
rpm -i CPfw1-50-04.i386.rpm
5 Run cpconfig and step through the Firewall-1 NG AI configuration. For
SecureXL, answer "yes". The VPN acceleration driver is automatically
installed if an accelerator card is installed.
For further information about the Check Point FireWall-1 NG AI installation,
refer to Check Point FireWall-1 NG AI documentation.
3COM Security Switch 6200 Applications Software Installation
1
and execute the