3Com 3CR13500 Software Install Manual page 10

3-2 Installing the Trend Micro VirusWall, eManager, and
IMSS Software onto Your System
Installing the
VirusWall
Software
1 Refer to the 3COM Security Switch 6200 Product Release Notes for the correct software version and rpm file
name.
• Origin, name, and destination of the file.
• Date the file was received.
• Identity of the virus found.
• Action taken.
This allows you to track the source of the problem and to take the appropriate
action.
The VirusWall software is unchanged from the tar files found on Trend
Micro's website. Refer to Trend Micro's website for all VirusWall
documentation.
NOTE: The VirusWall software requires a license from Trend Micro.
Downloading the VirusWall and eManager Software onto Your system
To download the VirusWall software onto your system, complete the following:
1 Log into your system as root.
2 Locate the file app-VirusWall-x.x-x.x.x.x.7xCOS.i686.rpm
following command:
[root@xxxxx rpm]# rpm -i app-VirusWall-x.x-
x.x.x.x.7xCOS.i686.rpm
You must now install the application as specified by Trend
Micro. The vendor files have been copied to /usr/os/apps/
VirusWall.
3 Change to the /
usr/os
cd /usr/os/apps/VirusWall
4 Locate the following tarball files:
VirusWall: isvw_v38build1080_linux.tar
Emanager: isem_lx_37_1008.tar.gz
5 To install VirusWall, complete the following:
a Execute the tar command on the following tar file:
tar -xvf isvw_v38build1080_linux.tar
b Change to the following directory:
cd /usr/os/apps/VirusWall/build_1080
c Step through the VirusWall configuration, using the following command:
./isinst
6 To install eManager, complete the following:
a Change to the VirusWall directory, using the following command:
3COM Security Switch 6200 Applications Software Installation
/apps/ directory, using the following command:
1
and execute the