For Macintosh Users; For Windows 3.11 Users - 3Com OfficeConnect 3C892A User Manual

C 5: C
50
HAPTER ONFIGURING THE
ISDN LAN M
ODEM
11 Click OK.

For Macintosh Users

1 From the Apple menu, open Control Panels. Double-click TCP/IP.
2 Choose Ethernet from the Connect via drop-down list box, if not already chosen.
The Configure drop down list box should be set to Manually if you are on a static
network.
3 Note the series of numbers entered in the Router address box. Write this number
down.
4 Enter this number into the Name server addr. box. (If you already have existing
address(es) listed, add the new address below the last entry.)
5 Choose File and Close.
6 When asked to save your changes, do so by choosing Save.
You may want to rename this configuration so that your previous configuration is
not overwritten.

For Windows 3.11 Users

1 Insert the 3Com Companion Programs CD-ROM into your PC.
2 Start the CD and then double click MS_TCP/IP.
Follow the instructions. If there are multiple options to choose from, leave the default
value.
3 From the Program manager, click Network.
4 From the Network group box, click Network Setup.
5 From the Network Setup dialog box, click the Drivers button.
6 From the Network Drivers dialog box, click Add Protocol.
7 Select Microsoft TCP/IP-32 and then click OK to install.
8 Once the files have been copied, browse for directory where you installed
MS_TCP/IP.
9 Select MS_TCP/IP and then click Setup.
10 Select Yes for Enable Automatic DHCP Configuration.
11 If you want to enter a name for you workstation, enter it in the Host Name field
and then click OK.
12 Restart your PC to allow the changes to take effect.
You are now ready to install your ISDN LAN Modem. Refer to
ISDN LAN Modem for the Typical Configuration" to continue.
"Configuring the