Understanding Last Call Information - 3Com OfficeConnect 3C892A User Manual

Understanding Last Call
Information
Table 13 Current Call Information Description
Current Call For This Call
Information Type
Data call options Data call
Call start time Voice or data
The call has been up for Data call
(seconds)
The connection has Data call
been idle for (seconds)
Number of octets Data call
received
Number of octets Data call
transmitted
Calling telephone or Voice or data
port number
Called telephone Voice or data
number
Reason for call coming Data
up
The last call information for both B channels (that is, call 1 and call 2) is as follows.
Table 14 Understanding Last Call Information
For This Call
Last Call Information Type
Call type Data or voice
Call direction Data or voice
Service provider name Outgoing data Indicates the destination to which the last call is
(continued)
Reviewing Statistics
Description
If the current call is a data call, indicates the type of
data call, (Multilink PPP or PPP); number of B channels
in use for the call; whether compression is on or off,
authenticatio type, and whether BACP was negotiated
(on) or not (off). For example,
Multilink (2B) No-BACP/Compression-On.
Displays the date and time the call began.
Indicates the length of time the current call has been
connected.
Indicates the length of time the current call has been
idle.
Indicates the number of octets (bytes) received by the
ISDN LAN Modem.
Indicates the number of octets (bytes) transmitted by
the ISDN LAN Modem.
For an incoming voice or data call, indicates the
telephone number of the calling party. For an outgoing
voice call, indicates the port from which the call was
placed. (For outgoing data calls, no information is
provided.)
For an outgoing data call, indicates the telephone
number dialed to reach the service provider for the
current call. For an incoming voice or data call,
indicates the telephone number dialed from the far
end. (For outgoing voice calls, no information is
provided.)
Indicates how the call was placed and which
workstation placed the call. Depending on how the call
was placed you should see something similar to the
following:
"Manual dial by Workstation A."
"DNS query from Workstation A for
http://www.xxx.xxx." If the call was automatically
launched and the workstation does not know the IP
address.
"Packet from Workstation A to IP address
xxxx." If the call was automatically launched and the
workstation knows the IP address.
Description
Indicates the type of call (data or voice) and the
B channel rate (56 Kbps or 64 Kbps) or TollMizer.
Indicates whether the last call is incoming or outgoing.
connected.
101