Understanding Service Provider Information - 3Com OfficeConnect 3C892A User Manual

C 9: T
102
HAPTER ROUBLESHOOTING AND
Understanding Service
Provider Information
M
AINTENANCE
For This Call
Last Call Information Type
Data call options Data call
Call start time Voice or data
The call was up for Data call
(seconds)
Number of octets Data call
received
Number of octets Data call
transmitted
Calling telephone or Voice or data
port number
Called telephone Voice or data
number
Reason for call going Voice or data
down
Reason for call coming Data
up
The following Service Provider information is provided after a call has ended.
Table 15 Service Provider Information Description
Service Provider Information
Number of successful
connections
Number of failed connections
Total number of octets received
Total number of octets
transmitted
Total connection time (seconds)
Description
If the last call was a data call, indicates the type of data
call, (Multilink PPP or PPP); number of B channels in use
for the call; whether compression is on or off and
whether BACP was negotiated (on) or not (off):
Multilink(2B) No-BACP/Compression-On.
Displays the date and time the call began.
Indicates the length of time this last call has been
connected.
Indicates the number of octets (bytes) received by the
ISDN LAN Modem.
Indicates the number of octets (bytes) transmitted by
the ISDN LAN Modem.
For the last incoming voice or data call, indicates the
telephone number of the calling party. For the last
outgoing voice call, indicates the port from which the
call was placed. (For outgoing data calls, no
information is provided.)
For the last outgoing data call, indicates the telephone
number dialed to reach the service provider for the
current call. For the last incoming voice or data call,
indicates the telephone number dialed from the far
end. (For outgoing voice calls, no information is
provided.)
Indicates why the last call was disconnected. For
example, idle timer expired, or manual disconnect.
Indicates how the call was placed and which
workstation placed the call. Depending on how the call
was placed you should see something similar to the
following:
"Manual dial by Workstation A."
"DNS query from Workstation A for
http://www.xxx.xxx." If the call was automatically
launched and the workstation does not know the IP
address.
"Packet from Workstation A to IP address
xxxx." If the call was automatically launched and the
workstation knows the IP address.
Description
Indicates the total number of successful connections to
each service provider.
Indicates the total number of unsuccessful connections to
each service provider.
Indicates the total number of octets (bytes) received by the
ISDN LAN Modem.
Indicates the total number of octets (bytes) transmitted by
the ISDN LAN Modem.
Indicates the collective amount of time connected to each
service provider so far.