*4 Save certificates and credential information in the
credential storage.
*5 VPN settings are also cleared.
Setting screen unlock method
Set to enter the screen unlock method
(pattern/PIN/password) when powering on
the terminal or canceling the sleep mode.
From the Home screen, [app
1
u
folder]
[Settings]
u
security]
[Screen lock].
Tap any one of [Pattern]/[PIN]/
2
[Password].
Follow the onscreen instructions
3
to set.
When the setting is complete, "Lock
・
screen & security" menu screen
reappears.
If you select "PIN", enter 4- to 16-digit of
・
numeric characters. If you select
"Password", enter 4- to 16 alphanumeric
characters/symbols.
u
[Lock screen &
Tap
of "Screen lock" as required.
4
Make pattern
Set whether to show pattern when
*
visible
entering pattern.
Automatically
Set the time from when the screen
lock
turns off to when the screen
automatically locks.
Power button
Set whether to instantly lock the
instantly locks
screen when the screen is turned
off by pressing the power key.
Lock screen
Enter a message to be displayed on
message
the lock screen.
* Appeared only when the "Pattern" is set.
Locking the screen
Screen lock is activated automatically when
you press the power key to put the terminal
into sleep mode after the screen lock
unlocking method (P.185) is specified, or
when the time specified in "Automatically
lock" has elapsed after the screen turns off.
To unlock the screen
■
While the screen is locked, press
1
the power key to turn on the
u
screen
Swipe (flick) up the
u
screen
Enter the screen lock
unlocking method.
Settings
185