Table of Contents
Advertisement
❖ Information
Depending on your usage environment, the
･
connection speed may be decreased, or Wi-Fi may
not be available.
When the terminal is connected to Wi-Fi network
･
successfully, "Connected" appears. If a different
message is displayed, make sure of the password
(security key).
When the connection is not established even if you
enter a correct password (security key), the correct IP
address may not have been acquired. Check the
signal status and reconnect. It may take 5 minutes or
more to display the connection result after the
operation of the connecting to Wi-Fi network.
If you connect to an access point that is not
･
connected to the Internet,
communication may be performed via mobile
network, not via Wi-Fi. To perform Wi-Fi
communication via such access point, tap a
notification indicating no Internet connection
appeared when connecting to an access point and
then follow the onscreen instructions.
To use docomo services via Wi-Fi, you need to set up
･
your d ACCOUNT (P.46).
Deleting connecting Wi-Fi network
setting
From the Home screen, [app
1
u
folder]
[Settings]
u
internet]
[Wi-Fi].
Tap the Wi-Fi network that is
2
connected.
[FORGET].
3
appears and
u
[Network &
Adding a Wi-Fi network manually
Turn Wi-Fi on beforehand (P.162).
･
From the Home screen, [app
1
u
folder]
[Settings]
u
internet]
[Wi-Fi].
[Add network]
2
(SSID) of the Wi-Fi network.
Tap "Security" setting item
3
security type of the Wi-Fi network
you want to add.
Select from the 4 options: "None",
･
"WEP", "WPA/WPA2 PSK", or "802.1x EAP"
If required, enter security
4
information for the Wi-Fi network
you want to add.
[SAVE].
5
❖ Information
To add hidden Wi-Fi network whose stealth setting is
･
enabled, in step 4, tap [Advanced option]
u
"Hidden network"
[Yes].
u
[Network &
u
Enter the name
u
Tap a
u
[No] of
Settings
163
Advertisement
Table of Contents
