Settings; Searching For Television Stations - Grundig Vision ECO 37-6950 T Manual

Installation Guide
Language Settings English
Active Antenna Power Off
Auto Tuning
Select
Installation Guide
Language Settings English
Active Antenna Power Off
Auto Tuning
Select
Please select country and scan type, then press OK to start tuning
Country Selection
a
Scan Type
Time Zone
Searching...
●●●●●●●●●●●●●●●●
57 % UHF CH49 DTV
ZDF
DTV
ZDFinfokanal
DTV
SAT.1
DTV
N24
DTV
ProSieben
DTV
kabel eins
DTV
Skip
Z
Exit
14

SETTINGS

Searching for television stations
T he television has an automatic tuning function, which first searches
for digital TV channels and then analogue ones.
You start the search and can then sort the television stations into your
order of preference.
There are 500 presets for digital channels and 99 for analogue
channels, to which you can assign TV stations from the antenna or
from the cable connection (analogue channels).
1 Press »
from standby mode.
– T he »Installation Guide« menu appears when the device is first
switched on.
s
2 Press »
Exit
Help:
If the »Installation Guide« menu does not appear on the screen,
make the setting by following the instructions on returning the
television to its factory condition on page 27.
Note
The antenna power supply may only be switched on if the
antenna is actually an active indoor antenna with a signal
amplifier and it is not already supplied with a voltage via a mains
plug (or similar supply).
Otherwise you may cause a short circuit and irreparably damage
your antenna.
3 Select the »Active Antenna Power« with »
s
Press »
Exit
4 Select »Auto Tuning« with »
– »Country Selection« is active.
5 Press »
Deutschland
s
6 Select the »Scan Type« with »
ATV & DTV
Press »
Berlin GMT+1
digital television stations (DTV), only analogue television stations
(ATV) or both (ATV & DTV).
7 Select »Time zone« with »
Press »
8 Press »●« to start the search.
– T he »Searching...« menu appears, and the search for TV
stations begins. This may take several minutes depending on
the number of television stations received.
– T he search is ended when the »Programme Table« appears.
Note:
The search can be ended prematurely with »
----------------------------------------------------------------------------------------------------
8 «, »1...0« or »P+« or »P–« to switch on the television
< >
« or » « to select the language.
< >
« or » « to switch on the antenna voltage (»On«).
V
< >
« or » « to select the country.
< >
« or » « to select whether you want to search for only
« or »
V
< >
« or » « to select time zone.
« or »
V Λ
« or » « and confirm with »●«.
Λ
« or » «.
V Λ
«.
Λ
i
«.
«.