Settings; Initial Set-Up And Tuning T Elevision Channels; Selecting Language, Country And Operating Mode; Tuning The Television Channels From Satellite (Dvb-S/ S2) - Grundig 48 VLE 5421 BG Instruction Manual

SETTiNgS

­-----------------------------------------------------------------------------------------------------------------------------------------
initial­set-up­and­tuning­­ t elevision­chan-
nels
T he television set is equipped with automatic channel search,
which searches for satellite channels (DVB-S/S2), terrestrial
channels (DVB-T), cable channels (DVB-C) and analogue
channels.
You start the search and the television channels will be stored
into the different Program Tables. Following, you can sort the
channels in the Program Tables.
The­various­settings
Depending on the type of antenna connected, you can decide
which channels you would like the television to search for.
DvB-S/S2­– Tunes digital television channels from the sat-
7
ellite, from page 9.
You have two options for this search:
– the basic installation which presets a standard selection,
e.g. the satellite Astra 19.2° East; you need only start the
search;
– the professional installation, which allows you to make
all required settings and set parameters for your receiver
system.
DvB-T­
– Tunes digital terrestrial television channels, on
7
page 10.
DvB-C­– Tunes digital television channels from the cable
7
provider, on page 10.
Tunes analogue television channels, in the chapter "Special
7
functions", starting on "Detailed Manual".
Tunes analogue television channels, you will find in the "De-
7
tailed Manual".
Note:­
Make the language and country selection for all types, then
7
continue reading the respective chapter.
Selecting­language,­country­and­oper-
ating­mode
1
Switch on the television set from standby with »
»1...0« or »p+« or »p-«.
– During initial set-up, the »Installation Guide« will be dis-
played.
Help:­
If this menu is not displayed, restore the t elevision set
7
to its default settings on "Detailed Manual".
2­
Select the menu language with »
press »oK« to confirm.
3­
Select the mode with »
firm.
– T he settings used in »Home Mode« help to save energy.
– Alternatively, the menu item »Shop Mode« can be se-
lected which the retailer can use for demonstrating the
device functions.
Note:
End the »Shop Mode« by restoring the television set to its
7
default settings on "Detailed Manual".
4­
Select the country in which the television set is operated
< >
with » «, » «, » « or »
v
– T he »Source Setup« menu appears with the »Connec-
tion Type« line marked.
Note:
You can find a description of how to tune the television
7
channel of your choice – depending on the antenna con-
nected – in the following chapters.
Tuning­the­television­channels­from­
satellite­(DvB-S/S2)
You have two options for tuning digital satellite channels.
A
The easy installation,
w hich pre-configures all antenna settings for the satellite
channels on Astra 19.2° East.
B The advanced installation
c an be used if you wish to receive satellite channels from
various satellites. To do so, you must make the antenna
settings (Satellite, LNB Power, LNB Type, DISEqC Mode,
LNB Selection) for the satellites chosen.
Easy­installation
1 In the »Source Setup« menu, in the »Connection Type«
line, select the option »Satellite« with »
2 Select the line »Easy Installation« with »
press »oK« to confirm.
– O ther menu options
the satellite Astra 19.2° East is preset.
3
Start the scan with »

– T he »Search results« menu appears, and the scan for TV
channels begins.
– D epending on the number of television channels re-
ceived, this can easily take a few minutes.
– T he scan is complete as soon as the »PROGRAM TABLE«
appears.
Note:
You can abort the scan by pressing »EXiT«.
7
< >
«, » «, » « or »
v Λ
< >
« or » « and press »oK« to con-
« and press »oK« to confirm.
Λ
< >
« or » «.
« or »
v Λ
will be displayed,
« (green).
ENGLISH
8
«,
« and
« and
9­