Operation With Common Interface; Inserting The Ca Module; Access Control For Ca Module And Smart Card - Grundig Vision ECO 37-6950 T Manual

CHANNEL SETUP
Autotuning
Digital Manual Tuning
Analogue Manual Tuning
Programme Table
Signal Information
CA - Module IRDETO ACCESS
Active Antenna Power
Z
Select
44
OPERATION WITH COMMON INTERFACE
Inserting the CA module
Note:
Switch off the appliance before inserting the CA module in the
»CI« slot.
1 Insert the smart card into the CA module.
2 Insert the CA module with the smart card into the »CI« slot on the
television.
Note:
To see which CA module is in the Common Interface slot, go to
the »CA - Module« submenu.
Access control for CA module and smart card
1 Open the menu with »i«.
– The »PICTURE« menu is displayed.
s
2 Select the »CHANNEL SETUP« menu with »
s
confirm with »●«.
s
s
3 Select »CA–Module« with »
confirm.
On
s
Notes:
Back
This menu give operating instructions and – after you enter your
Exit
PIN code – access to channels of the PAY-TV provider.
The remaining settings are described in the manuals for your CA
module and smart card.
4 Press »
i
« to finish the settings.
<
« or »
« or » « and press »●« to
V Λ
>
« and