Special Settings; Tuning Digital Television Stations - Grundig Vision ECO 37-6950 T Manual

CHANNEL SETUP
Auto Tuning
Digital Manual Tuning
Analogue Manual Tuning
Programme Table
Signal Information
CA - Module Removed
Active Antenna Power On
Back
Z
Select
Exit
Searching...
●●●●●●●●●●●●●●●●
57 % UHF CH49 DTV
ZDF
DTV
ZDFinfokanal
DTV
SAT.1
DTV
N24
DTV
ProSieben
DTV
kabel eins
DTV
Z Skip
Exit
Digital Manual Tuning
UHF CH 34
Frequency 578 MHz
Poor Normal Good
●●●●●●●●●●●●●●●●
–
0 9
Select
Back
Z
Exit
SPECIAL SETTINGS
Tuning digital television stations
This search deletes all television stations included in the channel
list!
Tuning all digital television stations using the
search
1 Open the menu with »i«.
– The »PICTURE« menu appears.
s
2 Select the »CHANNEL SETUP« menu with »
s
s
3 Select »Auto Tuning« with »
s
4 Select »Country Selection« by pressing »
<
» « or »
s
5 Select the »Scan Type« with »
<
Press »
with »●«.
– The »Searching...« menu appears, and the search for digital
TV stations begins. This may take several minutes depending
on the number of television stations received.
– The search is ended when the »Programme Table« appears.
Note:
You can stop the search by pressing »
i
6 Press » « to end the setting.
Tuning the digital television stations by entering
the channel numbers
1 Open the menu with »i«.
– The »PICTURE« menu appears.
2 Select the »CHANNEL SETUP« menu with »
3 Select »Digital Manual Tuning« with »
to confirm.
– The »Digital Manual Tuning« menu appears.
4 Enter channel number directly with »
– The search is finished when the channels found appear in
the list.
i
5 Press »
« to end the setting.
« or »
V
>
« to make the setting.
V
>
« or » « to select the »DTV« display and start the search
- ------------------------------------------------------------------
< >
« or » «.
« and confirm with »
Λ
« or » « and press
V Λ
«.
i
«.
< >
« or » «.
« or » « and press »
V Λ
« and press »●« to confirm.
1 ... 0
«.
●
«
●
45