Pc Monitor Mode; Connecting A Pc; Selecting The Channel Position For The Pc; Settings For The Pc - Grundig Vision ECO 37-6950 T Manual

PC SETUP
Auto Adjust
Horizontal Position
●●●●●●●●
Vertical Position
●●●●●●●●
Size
●●●●●●●●●●
Phase
●●●●●●●●●
Z Back
Select
Exit
PC MONITOR MODE
Connecting a PC
1 Connect the socket »PC-IN« on the television to the corresponding
socket on the PC using a VGA cable.
2 Connect the socket
corresponding socket on the PC using a cinch cable (audio
signal).
Note:
Adjust your PC to the monitor (for example, picture resolution
1280 x 768, picture frequency 60 Hz).
Selecting the channel position for the PC
1 Press »AV«, select the »PC« channel with »
»●« to confirm.
Settings for the PC
1 Open the menu with »i«.
–The »PICTURE« menu is displayed.
2 Select the »PC SETUP« menu with »
»●«.
3
Select the function or setting you want with »
<
press »
45
45
– Options:
0
50
»Auto Adjust«
»Horizontal Position«
horizontally;
»Vertical Position«
»Size«
»Phase«
i
4 Press » « to finish the settings.
»PC Audio« on the television to the
>
« or » « to execute it.
F or automatic PC configuration;
A djust the picture position
Adjust the picture position vertically;
Set the cycle frequency;
R emove horizontal flicker, blurring
and horizontal lines.
-----------------------------------------------------------
« or » « and press
V Λ
< >
« or » « and confirm with
« or »
V Λ
« and
43