Bosch Professional GBH 2-26 DBR Operating Instructions Manual page 15

OBJ_BUCH-370-001.book Page 15 Friday, May 4, 2007 5:30 PM
12 Securing screw for key type drill chuck*
13 Key type drill chuck*
14 SDS-plus adapter shank for drill chuck*
15 Extraction sleeve of the dust extraction
attachment*
16 Clamping screw for the dust extraction
attachment*
17 Depth stop of the dust extraction attachment*
18 Telescopic pipe of the dust extraction attachment*
19 Wing bolt of the dust extraction attachment*
20 Guide pipe of the dust extraction attachment*
21 Universal bit holder with SDS-plus shank*
*The accessories illustrated or described are not
included as standard delivery.
Noise/Vibration Information
Measured values determined according to EN 60745.
Typically the A-weighted noise levels of the product
are: Sound pressure level 91 dB(A); Sound power
level 102 dB(A). Uncertainty K =2 dB.
Wear hearing protection!
Vibration total values (triax vector sum) determined
according to EN 60745:
Hammer drilling into concrete: Vibration emission
2
value a =15 m/s , Uncertainty K=1.5 m/s
h
Chiselling: Vibration emission value a
2
Uncertainty K=1.5 m/s .
The vibration emission level given in
WARNING
this information sheet has been
measured in accordance with a standardised test
given in EN 60745 and may be used to compare one
tool with another.
The vibration emission level will vary because of the
ways in which a power tool can be used and may
increase above the level given in this information sheet.
This could lead to a significant underestimate of expo-
sure when the tool is used regularly in such a way.
Note: To be accurate, an estimation of the level of
exposure to vibration experienced during a given
period of work should also take into account the times
when the tool is switched off and when it is running but
not actually doing the job. This may significantly
reduce the exposure level over the total working
period.
1 619 929 787 • 4.5.07
Technical Data
Rotary Hammer
Article number
Speed control
Stop rotation
Right/left rotation
Rated power input
Impact frequency at rated
speed
Impact energy per stroke
Rated speed
Tool holder
Spindle collar diameter
Drilling diameter, max.:
– Concrete
– Brickwork (with core bit)
– Steel
– Wood
Weight according to
EPTA-Procedure 01/2003
Protection class
The values given are valid for nominal voltages [U] of 230/
240 V. For lower voltage and models for specific countries,
these values can vary.
2
,
Please observe the article number on the type plate of your
2 machine. The trade names of the individual machines may
=12 m/s ,
h
vary.
Declaration of Conformity
We declare under our sole responsibility that this
product is in conformity with the following standards
or standardization documents:
EN 60745 according to the provisions of the direc-
tives 89/336/EEC, 98/37/EC.
Dr. Egbert Schneider
Senior Vice President
Engineering
16.04.2007, Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
GBH 2-26 DBR
Professional
0 611 255 5..
W 800
bpm 0–4000
J 0–3.0
rpm 0–900
SDS-plus
mm 50
mm 26
mm 68
mm 13
mm 30
kg 2.9
/ II
Dr. Eckerhard Strötgen
Head of Product
Certification
English | 15