Specifications - JUKI PS-800-13085 Instruction Manual

1. SPECIFICATIONS

1 Sewing area (X,Y)(mm)
2 Feed motion of feeding frame
3 Needle bar stroke
4 Max. sewing speed
5 Settable stitch length
6 Needle
7 Hook
8 Intermediate presser stroke
9 Lift of intermediate presser
10 Lift of disc presser
11 Memory of pattern data
12 Number of patterns that can be identified Max. 999 patterns
13 Program input method
14 Data format
15 Main shaft servomotor power
16 Power consumption
17 Input voltage
18 Mass (gross mass)
19 Dimensions
20 Operating temperature range
21 Operating humidity range
22 Storage temperature range
23 Storage humidity range
24 Air pressure used
25 Needle highest position stop facility
26 Noise
27 Lubricating oil
Number Stitch pitch
1 2.8 mm
2 3.0 mm
3 4.0 mm
4 5.0 mm
Note: The sewing machine must not run at the maximum number of revolutions continuously for more than
15 minutes. The number of revolutions may vary even if the pitch is consistent due to the change in the
needle and material.
1300 × 850
(Cutting area Rotary knife type : 698 × 391
Laser type : 646.5 × 426.5)
Intermittent feed (2-shaft drive by stepping motor)
39.5 mm
3,000 sti/min (When stitching pitch is 2.5 mm or less)
For other stitch pitches and numbers of revolutions, refer to Fig. 1.
0.5 to 12.7 mm
DB×1 #8 (#7 to #14), DP×5 #8 (#7 to #14)
To be chosen according to the model.
Double-capacity full-rotary hook
4 mm (Standard)
20 mm
15 mm
Max. 999 patterns
USB
DXF.AI.PLT.DST
750W
640VA
220V ± 10%
590 kg [Rotary knife type] 598 kg
2,190 mm (W) × 2,100 mm (L) × 1,250 mm (H)
5 to 35 ˚C [Laser type] 1 to 35 ˚C
35 to 85 % (No dew condensation)
-5 to 60 ˚C [Laser type] -10 to 100 ˚C
20 to 85 % (No dew condensation, 85 % applies to the case where the temper-
ature is 40 ˚C or lower)
[Laser type] 20 to 85 % (No dew condensation)
0.5 to 0.6 MPa
After the completion of sewing, the needle can be brought up to its highest
position.
- Equivalent continuous emission sound pressure level (L
A-weighted value of 78.0 dB ; (Includes K
10821- C.6.2 -ISO 11204 GR2 at 2,800 sti/min.
#10 (Equivalent to JUKI NEW DEFRIX OIL No. 1)
#32 (Equivalent to JUKI NEW DEFRIX OIL No. 2), Lithium based grease No. 2
Grease information
Manufacturer: WERATCHE
Type and number: Lithium base 2# grease
Stitch pitch and the sewing speed
Sewing speed
2,500 sti/min
2,500 sti/min
2,000 sti/min
2,000 sti/min
Fig. 1
– 1 –
[Laser type] 655.7 kg
[Laser type] 5 to 70 %
) at the workstation :
pA
= 2.5 dB) ; according to ISO
pA
Remarks