Adjusting The Electronic Intermediate Presser Stroke - JUKI PS-800-13085 Instruction Manual

4-18. Adjusting the electronic intermediate presser stroke

❶
❷
❸
It is necessary to adjust the intermediate presser
stroke (A) appropriately since there would be the
need for preventing stitch skipping depending on
A A
thickness or type of the material.
1) Press
2) When you press the "Machine setting parameter",
3) On the screen that is displayed by pressing the
– 33 –
❶ on the main screen of electrical
box.
❷ is displayed.
When you enter the password "11111111", screen
❸ is displayed.
"Presser follow-up setting", set the parameter (the
follow-up height of presser foot has been facto-
ry-adjusted to 2 mm at the time of shipment).