Bluetooth Setup - Kenwood KDC-BT41U Instruction Manual

Bluetooth Setup

1 Press to enter Bluetooth mode.
Turn the volume knob to select [SETTINGS], then press to enter.
2
Turn the volume knob to make a selection, then press to confirm.
3
■
See table below for selection.
■
Repeat step 3 until the desired item is selected/activated.
■
Press to return to the previous item.
Hold to finish the procedure.
4
■
To exit Bluetooth mode, press
Item
PAIRING
DEVICE SEARCH/ Registers a Bluetooth device (pairing).
DVC SEARCH (For details, see page 20.)
PHONE SELECT/ Selects a cell-phone connection.
PHONE SEL (For details, see page 20.)
S-DVC SELECT/ (For details, see page 20.)
S-DVC SEL
DEVICE DELETE/ Cancel registration of the Bluetooth device.
DVC DELETE 1. Turn the volume knob to select the Bluetooth device, then press to confirm.
2. Turn the volume knob to select "YES", then press to confirm.
SMS DOWNLOAD/ Download a short message. (For details, see page 24.)
SMS DL
VOICE TAG
PB NAME EDIT/ Registers voice for voice recognition and voice to select the Phone number category in Phone book.
PB NAME EDT (For details, see page 21.)
PN TYPE EDIT/
PN TYPE EDT
DETAILED SET/
DETAIL SET
PIN CODE EDIT/ Specify the PIN code required when registering this unit using the Bluetooth device. By default, "0000" is
PIN EDIT specified.
1. Turn the volume knob to select the number.
■
■
2. Press the volume knob to register a PIN code
AUTO ANSWER OFF: Does not answer the phone call automatically. ; 0: Automatically answers the phone call at once. ;
1 – 8 * –99: Automatically answers the phone call after lapse of 1 – 99 seconds.
RECONNECT/ ON *: Automatically reconnects the selected Bluetooth device when radio wave becomes strong enough,
RECONCT even after it is disconnected. ; OFF: Cancels.
■
When this function is turned ON, the Bluetooth device is reconnected if it has been disconnected by
selecting [PHONE SELECT]/ [PHONE SELL].
BT HF FRONT *: Outputs audio from the front-left and front-right speakers. ; ALL: Outputs audio from the all
speakers.
CALL BEEP ON *: You can output a beep from the speaker when a call comes in. ; OFF: Cancels.
22
English
.
To move to the next digit, press ¢.
To delete the last digit, press 4.
Selectable setting (Preset: *)