■
To return to the Phone Book mode, press
.
Press the volume knob to start searching.
5
Turn the volume knob to select a name
6
and category.
To move to the next character, press 4
■
/ ¢.
Press the volume knob to make a call.
7
■
To use the Phone Book, it must be
downloaded to this unit in advance. Refer to
<Downloading the Phone Book> (page 18).
■
During search, a non-accent character such
as "u" is searched for instead of an accent
character such as "ü".
■
The category items in the Phone Book are
displayed as follows.
GE: General ; HM: Home ; OF: Office ;
MO: Mobile ; OT: Other
Calling a Number in the Call Log
Turn the volume knob to select the
2
"OUTGOING" (outgoing call), "INCOMING"
(incoming call), or "MISSED CALLS"/"MIS-
CALL" (missed call), then press to enter.
Turn the volume knob to select a name or
3
phone number.
Press the volume knob to make a call.
4
■
The outgoing call list and the incoming call
list, and the missed call list are the lists of
calls originated from and received at this
unit. They are not the ones stored in the
cell-phone memory.
Dial a Number
Turn the volume knob to select "NUMBER
2
DIAL", then press to enter.
Turn the volume knob to select the
3
phone number
To move to the next digit, press ¢.
■
To delete the last digit, press 4.
■
Press the volume knob to make a call.
4
■
You can input max 25 digits.
Speed Dialing (Preset Dial)
Press number button (1 – 6).
2
Press the volume knob to make a call.
3
Registering to the Preset Dial Number
(Preset Memory)
Enter the phone number with reference
2
to the following:
Dial a number/ Calling a number in the call
log/ Calling a number in the Phone Book
Press and hold number button (1 – 6) for
3
about 2 seconds.
Make a Voice Dialing Call
Turn the volume knob to select "VOICE
2
RECOG", then press to enter.
"V-RECG READY"/ "VR READY" is displayed.
Press the volume knob to start voice
3
recognize.
"PB NAME" is displayed.
4
When a beep is heard, say the name within
2 seconds.
5
"PN TYPE" is displayed.
When a beep is heard, say the category
name within 2 seconds.
The recognized phone number (name) is
displayed.
6
Press the volume knob to make a call.
■
This step is the same as step 4 of the
procedure in <Calling a Number in the
Phone Book> (page 16). You can make a
call or select a category.
■
If your voice cannot be recognized, a
message is displayed. Pressing the Volume
knob allows you to retry voice input. Refer
to <Troubleshooting> (page 33).
■
Both the name and category require
registration of a voice tag. Refer to <Setting
a Voice Command> (page 21).
■
Audio sound is not output during voice
recognition.
Receiving a Call
Answering a Phone Call
Press
or the volume knob.
Rejecting an Incoming Call
Press
SRC.
17
English