Technical Specifications - IVT MPPTplus+ Series Operating Instructions Manual

Required minimum cross sections:
1.5mm² up to 10 A
•
2.5mm² up to 20 A
•
4.0mm² up to 30 A
•
Make sure that the line between battery and MPPTplus
supplied temperature sensor is used, it must be mounted directly on the battery housing to ensure proper function.
2. Connecting the solar module
Connect the solar module with the solar controller using the corresponding screw type terminals.
Note: The maximum off-load voltage of the solar module is 70 V!
3. Connecting the load
Please observe correct polarity when connecting the consumers!
Caution: Make sure that the load output of the solar controller is switched off!
The activated load output is indicated on the display by means of the bulb icon. The load can be switched on and off
by pressing the corresponding button.
Attention: It's not allowed to connect the MPPTplus to a PC with the USB interface
Changing the fuse
The solar controllers of the MPPTplus+ series are equipped with a fuse which is accessible from outside and can be replaced
easily. Caution: Replace the fuse only by a fuse of the same type and rated current!
Operation with optional additional equipment
Optionally, all models of the MPPTplus+ solar controller series can be controlled, parameterized and monitored with a
touchscreen remote control (FB-04, FB-05) or a webbox.
Note: Please consult the manufacturer for more information on the functionality of the respective devices.

Technical specifications

For features and intensity of current, please observe the respective type plate of your device!
System voltage
Supported types of
rechargeable battery
Charging end voltages for
lead/AGM/LiFePO4
Float voltage
Deep discharge protection
voltage
Reset voltage
Maximum module power
12V system / 24V system
Solar module voltage
Max. module/load current
Own consumption, active
Own consumption, standby
Operating temperature
Temperature sensor
Maximum efficiency
Fuse
Housing
Dimensions
Weight
Environmental protection note
At the end of its useful life, this product may not be disposed of together with normal household waste, but has to be dropped off at
a collection centre for the recycling of electrical and electronic devices. This is indicated by the symbol on the product, on the
instruction manual or on the packaging.
The materials of which this product is made are recyclable pursuant to their labelling. With the reuse, the recycling of the materials
or other forms of scrap usage, you are making an important contribution to the protection of the environment. Please ask your local
authorities for the appropriate disposal centre.
Technical specifications subject to change. We assume no liability for typographical errors. V2_10/2014
Phone: 0049 (0) 9622-719910, fax: 09622-7199120; Info@IVT-Hirschau.de;
MPPTplus+ 10 A
12V system: 14.1V / 14.7 V / 14.6 V
120 W / 240 W
10 A
10 A
187 x 55 x 78 mm
0,59 kg
© IVT Innovative Versorgungs-Technik GmbH, Dienhof 14, D-92242 Hirschau
+
solar controller is fused according to instructions. If the
MPPTplus+ 20 A
12/24 V
Lead batteries (open, GEL, AGM), LiFeP04
24V system: 28.2V / 29.4V / 29.2 V
13.8 V / 27.6 V
10.5 V / 21.0 V
12.5 V / 25.0 V
240 W / 480 W
8 – 70 V
20 A
50 mA
< 10 mA
-20° C to +60° C
yes (external)
> 97%
20 A
metal
187 x 55 x 103 mm
0,73 kg
www.IVT-Hirschau.de
11
!
MPPTplus+ 30 A
360 W / 720 W
30 A / 20 A
30 A
187 x 55 x 141 mm
0,95 kg