Table of Contents
Advertisement
User Guide
Note: A path is a dedicated channel of communication, which cannot be established until
both the volume and host have been created.
Note: The following instructions define how to create a path to a host through the storage
device's Volumes section. That same path may also be created from the other direction—to
a volume through the storage device's Hosts page.
Step 1 : Navigate to the storage device (see
Step 2 : Click the storage device's Volumes icon:
The Volumes information appears:
Step 3 : From the list of available volumes, identify the one that will be used to create the path.
If that volume has been configured to allow any host, a dedicated path cannot be established
between it and a specific host. If this is the case, it will be indicated by the following:
• The Allow Any Host setting will be toggled to the ON (enabled) position:
• When the user hovers over the path arrows beside the volume Name, the tooltip will
indicate that this volume is expecting a VLAN path, not a host path:
Navigating to a Device (page
3. Management
3.1 OCGUI
50)).
90
Advertisement
Table of Contents
