Table of Contents
Advertisement
User Guide
Figure 265: BMC Module Release Handle Operation
b. Lower the release handle until the BMC Module is fully unseated (this occurs at about 60°).
Pull the BMC Module out of the chassis, ensuring that you support the under side of the
module with your other hand:
Figure 266: Remove BMC Module
Step 8 : Remove the Chassis from the rack.
a. Remove the rack ear covers from both of the chassis mounts.
Tip: A T15 Torx screwdriver is required for this step.
3. Management
3.2 Part Replacement
151
Advertisement
Table of Contents
