User Guide
Figure 238: Chassis Screw Installation
c. Verify that the Chassis is secured to the rails and does not move when pulled. If the
enclosure is not secured to the rack, remove the screws and try again.
d. Install the rack ear covers onto both of the chassis mounts:
Figure 239: Rack Ear Cover Installation
Step 9 : Install the OpenFlex F3x00 s into the enclosure:
a. Determine and record what slots are physically populated with an OpenFlex F3x00 .
The slots are assigned letters A through J, from left to right, when facing the front of the
enclosure. These slot assignments coincide with the QSFP28 ports on the rear of the
enclosure. This information will be utilized during the connection of the QSFP28 ports.
3. Management
3.2 Part Replacement
137