Western Digital OpenFlex F3 Series User Manual page 89

User Guide
Step 11 : Click Close and review the Volumes information to verify that the newly created volume(s)
appears on the list.
3.1.6.12 Extending Volumes
This task provides instructions for extending (increasing) the capacity of an existing volume within an
F3x00 storage device using the OCGUI.
Before you begin:
Note: A volume may only be extended a maximum of seven (7) times during its life. If that
volume is deleted and another recreated in its place, the new volume can then be extended
up to the maximum of seven (7) times.
Step 1 : Navigate to the storage device (see
Step 2 : Click the storage device's Volumes icon:
The Volumes information appears:
Navigating to a Device (page
3. Management
3.1 OCGUI
50)).
82