Table of Contents
Advertisement
User Guide
Space Requirements
Installation of the OpenFlex F3x00 and E3000 requires two people and enough space in front of the rack
for a safe installation. The recommended forward clearance is 889 mm / 35 in. from the front of the rack
and 609.6 mm / 24 in. on both sides of the enclosure. It is also recommended to make considerations for
any carts or lift equipment that might be used to perform the installation.
Servicing of the OpenFlex F3x00 and E3000 requires one person and a minimum of 889 mm / 35 in. of
space in front of the rack to allow enough clearance to remove an F3x00 from the enclosure.
The following diagram provides measurement details for installation and servicing:
Figure 11: Installation and Servicing Space
5.
The weight of the enclosure during installation will vary, depending on the number of F3x00 devices and blanks contained
in the E3000. In some situations, carts or lift equipment may be required.
1. Overview
1.9 Site Requirements
5
19
Advertisement
Table of Contents
