Connection; Operations; Turning The Power On And Off - Toshiba TDP-T98U Owner's Manual

Connection

Before connection
• Read the owner's manual of the device you are connecting to the projector.
• Some types of computer cannot be used or connected to this projector.
Check for an RGB output terminal, supported signal
• Turn off the power of both devices before connecting.
• The figure below is a sample connection. This does not mean that all of these devices
can or must be connected simultaneously. (Dotted lines mean items can be exchanged.)
Computer (for control)
VCR
To audio output To video To audio output
To RS-232C
White (L)/Red (R) output White (L)/Red (R)
p.41
terminal
Video cable (not supplied)
Control cable
AV cable
(not supplied)
Audio cable
RGB cable
(not supplied)
(not supplied)
Monitor cable Mini
To RGB D-sub 15P-BNC
output
(not supplied)
To Y/C /C output
B R
To audio
Green (Y)/Blue (C
B
output
Conversion adapter BNC-pin
(not supplied)
Computer DVD video recorder, etc.
Notes
• COMPUTER terminals 1 and 2 function identically.
• The AUDIO IN terminal doubles for devices connected to COMPUTER terminals 1 and 2.
p.39 , etc.
Audio amplifier, etc.
Video recorder,
DVD player, etc.
To S-Video To audio input
Audio cable
output White (L)/Red (R)
(not supplied)
S-Video cable
(not supplied)
RGB cable
Audio cable
(supplied)
(not supplied)
To audio output To RGB output
)/Red (C )
R
Computer
20

Operations

Turning the power on and off

Connecting the power cord
1
Insert the power cord connector into the
AC IN socket of the projector.
2
Insert the power cord plug into a wall or
other power outlet.
Removing the lens cover
Be sure to remove the lens cover when the power is
turned on. If it is left on, it could become deformed due
to heat.
Turning the power on
1
Turn on the main power switch
The ON indicator will change to
orange, indicating standby mode.
2
Press the ON/STANDBY
button.
The power turns on, and the following
3 green indicators light: ON, LAMP,
and FAN. After a moment, the start-up
screen appears.
CAUTION
• Do not look into the lens while the lamp is on. The strong light from the lamp may cause
damage to your eyes or sight.
• Do not block the air intake or exhaust. Doing so could cause a fire due to internal overheating.
• Do not place your hands, face, or other objects near the air exhaust. Doing so could cause
burns, deform/break the object.
Power cord connector
(Supplied)
(Orange)
Remote
Control panel Control
Start-up screen
21