Notes On Usage And Storage; Safety Precautions - Epson SC-V7000 User Manual

Notes on Usage and Storage

Safety Precautions

Notes on Handling
D
• Do not remove any covers or parts of the printer. Otherwise, electric shock could occur.
• In the following situations, turn off the printer immediately and contact your local dealer
DANGER
or Epson support. Continuing to use the printer may cause fire or electric shock to occur.
∗ If you hear an unusual noise
∗ If you notice an unusual odor
∗ If smoke is emitted
∗ If a piece of metal, water, or other liquid has entered the printer
∗ The power cord is damaged
• Do not place flammable items such as paper or cloth near the UV lamp. Otherwise, a fire
or smoke may occur.
• Do not touch the UV lamp during printing. It can become extremely hot and could cause
injuries or burns. When performing maintenance, allow the lamp to cool for at least six
minutes before you start.
• If UV light from the printer is continuously irradiated onto combustible material for a few
seconds, it could ignite. If any pieces of media remain on the lamp, remove them.
D
• Keep your clothes and body away from moving parts. Also, do not wear bracelets and so
on around the printer. Otherwise, you could be caught by the moving parts and injured.
WARNING
• Do not look directly at the UV light or allow it to irradiate your skin. Also, make sure you
are at least 1 m (3.3 ft.) away from the UV lamp during printing. Harmful ultraviolet light
(UV) can cause severe burns to the skin and loss of vision.
• Wear industrial safety glasses that block UVA, UVB, and blue light.
• Wear appropriate clothing that protects the skin from UV light.
• Do not place a chair within 5 m (16.4 ft.) of the printer. The UV light emissions are at their
highest at a height of 90 cm (35 inches) from the floor and increase significantly as you
approach the lamp. It is dangerous to sit near this printer while it is operating.
• Do not touch parts with high temperature warning labels. Otherwise, injuries or burns
could occur. Wear heat-resistant gloves if you need to touch hot parts.
• Do not touch the gantry or put your hand under the gantry while the printer is operating.
Otherwise, injuries could occur.
• Do not touch the cable carrier while the printer is operating. Otherwise, you could be
caught by the printer parts and injured.
• Do not disassemble or re-model the printer. Otherwise, injury, electric shock, or fire could
occur.
• Do not use the printer if dust has accumulated inside the printer. Doing so could cause a
fire or malfunction to occur. Contact your local dealer or Epson support to request
cleaning for the inside of the printer.
Before Use
23