Toshiba RD-X2U Owner's Manual page 181

Still Group Interval
HDD DVD-RAM
Sets an interval for display of still pictures (in seconds)
when playing back a collection of still images.
1 sec. : 2 sec. : 3 sec. : 5 sec. : 10 sec. : Default
Rec DNR
HDD DVD-RAM
Selects the level of 3D digital noise reduction that can
reduce noises of a picture with many noise, depending
on pictures.
Off:
Deactivates the 3D digital noise reduction.
On:
Sets the normal level.
Expanded:
Increases digital noise reduction.
Notes
• When you set "Rec DNR" to "On" or "Expanded" and set
"3D Y/C Separation" to "On", the priority changes
depending on the input selection. If you select the S-video
input, "Rec DNR" has priority. When you select the built-in
tuner or composite input, "3D Y/C Separation" has priority.
• If you want to avoid an afterimage, set this setting to "Off".
3D Y/C Separation
HDD DVD-RAM
The 3D digital comb filter executes Y/C (Brightness/
Color) separation to reduce the color irregularity or cross
color interference.
Off:
Deactivates this function. In an area where the
broadcast reception is extremely bad, select this
mode.
On:
Activates this function. In normal conditions, select
this.
Note
• Refer to the "Notes" in the above "Rec DNR".
*RD-X2.Ope(US)p117-130 129
HDD/RAM Title Play
HDD DVD-RAM
Sets the resume play per title.
Title Resume:
Remembers the point where you stop playback. Allows
you to resume the playback from that point.
Serial Playback:
You can play back titles (original, play list) stored in the
HDD or DVD-RAM continuously.
Because there is no division between titles, the
recorder remembers only the last point where you
stopped playback.
Relay recording
HDD DVD-RAM
Turn on or off a function that makes a recording
automatically onto the HDD when the remaining space of
a DVD-RAM disc is reduced to less than 10 minutes or
when a disc is not loaded.
Off:
Deactivates this function.
On:
Activates this function.
Notes
• The Relay recording does not function when you set the
Rate Conversion Dubbing or Line-U Dubbing.
• Even if you set "Relay recording" to "Off", A-B programmed
recording, will be performed on the HDD.
• During playback of the HDD when you start Relay
recording and the Content Menu is displayed, playback
stops.
• During Relay recording, HDD Title Playback is not
available.
• When the remaining space on the HDD is small, Relay
recording does not function.
9/3/02, 11:25 AM
129