Connecting To A Satellite System - Toshiba RD-X2U Owner's Manual

Connections

Connecting to a satellite system

Choose one of the following according to your type of satellite receiver.
Satellite antenna
IN
3CH
4CH
®
DSS satellite receiver
Satellite antenna
IN
DSS ®
satellite
receiver
Audio/video outputs
18
RD-X2U.Prep.(E)p13-24
OUT
Incoming cable
18
When the satellite receiver does not have audio/
video inputs
1 Connect a satellite antenna to the satellite receiver.
2 Connect the RF IN (FROM ANT.) terminal on the
recorder and the RF OUT terminal of the satellite
receiver.
3 Connect the RF OUT (TO TV) terminal on the recorder
and the antenna input connector of the TV.
You will need to:
• set "Cable Box/DSS" to "Use" on the "Initial Settings"
menu. page 38
• set "Output Channel" to "3CH" or "4CH" on the "Initial
Settings" menu. page 39
When the satellite system has audio/video outputs
1 Connect a satellite antenna to the satellite system.
2 Connect the INPUT1 (VIDEO/L/R) jacks on the
recorder and the audio/video output jacks of the
satellite system.
3 Connect the OUTPUT1 (VIDEO/L/R) jacks on the
recorder and the audio/video input jacks of the TV.
4 Connect the RF OUT (TO TV) terminal on the recorder
and the antenna input connector of the TV.
You will need to:
• set "Cable Box/DSS" to "Use" on the "Initial Settings"
menu. page 38
• set "Output Channel" to "Line 1" on the "Initial Settings"
menu. page 39
9/3/02, 9:47 AM