Operation Settings - Toshiba RD-X2U Owner's Manual

Function Setup
Customizing the Function Settings (Continued)

OPERATION Settings

Pause/Still
HDD DVD-RAM DVD-VIDEO
Auto:
Normal setting. Pause the moving image without
blurring.
Frame:
Displays high resolution still image.
DVD Parental Lock
DVD-VIDEO
DVD video discs equipped with the Parental Lock
function has a predetermined limitation level. The
limitation level or limitation method may differ depending
on the disc. For example the total disc may not be played
back, or an extreme violent scene maybe cut or replaced
automatically by another scene.
Important
• Depending on discs, it may not be evident whether the
disc is compatible with the Parental Lock function.
Make sure that the Parental Lock function you set is
activated correctly.
On:
Select this to activate the Parental Lock function or to
change the setting.
After pressing the ENTER button, follow steps 1 – 3
below.
Off:
Deactivate the Parental Lock function.
After pressing the ENTER button, follow steps 1
below.
1) Enter a 4-digit password by using the
number buttons, then press the ENTER
button.
If you make a mistake entering your password,
press the CLEAR button before pressing the
ENTER button, and re-enter the correct pass-
word.
2) Select a country with the desired limitation
level by pressing the
126
*RD-X2.Ope(US)p117-130
/ buttons.
126
3) Select the desired limitation level by press-
ing the / buttons, and then press the
ENTER button.
DVD parental lock level setting
Code -
Level 8 Prohibited
Level 7 Allowed
Level 6
Level 5
Level 4
Level 3
Level 2
Level 1
Unless the Parental Lock function is set to "Off",
a disc that has a higher limitation level than your
selected limitation level cannot be played back.
For example, if you select level 7, discs of over
level 8 are locked and cannot be played back.
When "USA" is selected, its limitation level corre-
sponds to the following settings.
Level 7 : NC-17 Level 3 : PG
Level 6 : R Level 1: G
Level 4: PG13
To change the limitation level of the Parental
Lock function
Follow step 1 - 3 above.
To change the password
1) Press the STOP button 4 times after select-
ing "On" or "Off", and then press the ENTER
button.
The password is cleared.
2) Enter a new 4-digit password by using the
number buttons.
3) Press the ENTER button.
9/3/02, 11:25 AM
-