Troubleshooting - Polar Electro GL178-A Instruction Manual

Telephone Helpline: 1300225960
Adjusting the Temperature
1. Press SET button. The set temperature is displayed.
2. Press up button
3. Press SET button to exit.
Manual Defrost
1. To start manual defrost press defrost button
2. To stop manual or automatic defrost press defrost button
Note: The appliance is not intended for the long term storage of food.
Cleaning, Care & Maintenance
Switch off and disconnect from the power supply before cleaning.
•
• Clean the interior of the appliance as often as possible
• Do not use abrasive cleaning agents. These can leave harmful residues
• Always wipe dry after cleaning
Cleaning the Condenser
Periodic cleaning of the Condenser can extend the life of the appliance.
POLAR recommend that a POLAR agent or qualified technician clean the condenser.

Troubleshooting

If the machine malfunctions due to causes other than those listed or the proposed corrective actions do
not solve the problem please call a Polar agent or qualified technician.
Fault
The appliance is The unit is not switched on Check the unit is plugged in correctly and switched on
not working
Plug and lead are damaged Call POLAR agent or qualified Technician
Fuse in the plug has blown
Power supply
Internal wiring fault
The appliance is Coolant Leak
not cooling
Fan Motor Failed
Airflow to the condenser
obstructed
Condenser is clogged
Error code EE4 • Restricted Airflow
• Blocked Condenser
GL178-A_A5_v2_20200907.indb 5 GL178-A_A5_v2_20200907.indb 5
or down button to change set temperature.
and hold for 6 seconds.
Probable Cause
Replace the fuse
Check power supply
Call POLAR agent or qualified Technician
Call POLAR agent or qualified technician
Call POLAR agent or qualified technician
Increase the gap between appliance and obstacles/
heat source
Call POLAR agent or qualified technician
•
•
.
Solution
Increase airflow
Call POLAR agent or qualified Technician
AU
5
2020/9/7 11:27 2020/9/7 11:27