Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Monarch Manuals
  4. Label Maker
  5. 9401
  6. Read this first manual

Monarch 9401 Read This First Manual

Hide thumbs Also See for 9401:
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual
Read This First
These pages tell you how to unpack and install your Monarch
9401
®
or 9402
Unpacking
The box that holds your printer also has
•
the printer power cord
•
the following manuals:
Equipment Manual
Operator's Handbook
System Administrator's
Guide
Messages Manual
TC9401GS Rev. B 6/93 ©1989-1993 Monarch Marking Systems, Inc. All rights reserved.
®
printer, and how to print a test tag or label.
Contains general setup and
maintenance procedures.
Tells you how to begin
using the printer and print
supplies. The manual also
tells you how to enter batch
data using the data entry
keys.
Explains communications
and message structures for
designing formats and
transmitting data from a
computer.
Lists error messages and
actions you should take (if
any).

Advertisement

loading

Related Manuals for Monarch 9401

Summary of Contents for Monarch 9401

  • Page 1 System Administrator’s Explains communications Guide and message structures for designing formats and transmitting data from a computer. Messages Manual Lists error messages and actions you should take (if any). TC9401GS Rev. B 6/93 ©1989-1993 Monarch Marking Systems, Inc. All rights reserved.
  • Page 2 9401/9402 Read This First To unpack the printer: 1. Check to see that you received the power cord and all the manuals. 2. Remove the cord, manuals, and packing material from the box. 3. Remove the printer from the plastic bag.

  • Page 3: Installing The Printer

    2. If you are going to use the printer on-line, connect the RS-232 (on-line) cable as shown. 3. If you are going to use the optional Monarch computer keyboard, remove the keyboard from its separate shipping carton. Then, remove the plastic cap from the end of the keyboard cable and connect it to the keyboard connector on the printer.

  • Page 4: Print Mode

    9401/9402 Read This First NOTE: The keyboard cable is marked with the word "TOP" to help you connect it to the printer. 4. Connect the power cord to the socket as shown. Plug the other end of the cord into a grounded 110VAC electrical outlet.
  • Page 5 9401/9402 Read This First 4. Press until you see MAIN MENU < Diagnostics 5. Press . You’ll see Enter password: _ _ _ _ _ _ _ 7 7 7 The printer has a password of until you change it. To change the password, refer to your System Administrator’s Guide .

  • Page 6: Test Label

    9401/9402 Read This First 8. Press once, then press You’ll see USER DIAG Supply Quality > 9. Press once, then press You’ll see a message similar to this TEST LABEL < Test Label 1 > 10. Press twice. The printer prints a bar code tag or label that looks like this.
  • Page 7 Diagnostics 15. Turn the printer Off. NOTE: If the printer is not printing correctly, contact your Monarch Service representative at the number on the back cover. Refer to your Equipment Manual to install your own supplies and get ready to print.

  • Page 8: Calling For Service

    9401/9402 Read This First Calling for Service If you need to call Monarch Service, print Test Label 2 before you call. The information on the test label will help Monarch assess the problem. For supplies, service, or assistance call: TOLL FREE: 1-800-543-6650 (In the U.S.A.)

This manual is also suitable for:

9402