Advertisement
Quick Links
F R E S H M A R X ® 9 4 1 7 Q U I C K R E F E R E N C E
For more detailed information, refer to the Operator's Handbook
available on our Web site (www.monarch.com).
Review the printer safety information in the Safety Sheet
provided with your printer.
1. Cover
2. Display
3. Left Printer
4. Right Printer
5. Speaker
Avery Dennison®, Monarch®, and Freshmarx® are
registered trademarks of Avery Dennison Corporation.
TC9417MCDQR Rev. AB 7/13
6.
Power Cord Connection
7.
Ethernet Port
8.
USB (Type B) Port
9.
USB (Type A) Port
10. Power Button
©2013 Avery Dennison Corp. All Rights Reserved.
Advertisement
Related Manuals for Monarch Freshmarx 9417
Summary of Contents for Monarch Freshmarx 9417
- Page 1 F R E S H M A R X ® 9 4 1 7 Q U I C K R E F E R E N C E For more detailed information, refer to the Operator’s Handbook available on our Web site (www.monarch.com). Review the printer safety information in the Safety Sheet provided with your printer.
- Page 2 U s i n g t h e H o m e S c r e e n Product Tabs Tools Language Toggle Button Product Categor y Buttons Buttons Use First Button U s i n g Q u i c k T i p s You can view the Quick Reference Guide information on the printer.
- Page 3 L o a d i n g L a b e l s – L e f t P r i n t e r Turn on the printer then open the cover. Pull on the supply tab. Unlock the supply guide and remove it. Place a roll of labels (label side up) on the supply holder.
- Page 4 Lock the supply guide. Put the supply tab back. Guide the labels along the inside edge and into the slot. The printer feeds the supply. Slide the supply lever next to the supply. Close the supply lever. 10. Close the cover. 4-EN...
- Page 5 L o a d i n g L a b e l s – R i g h t P r i n t e r Turn on the printer then open the cover. Pull on the supply tab. Unlock the outer supply guide and remove it. Place a roll of labels (label side up) on the supply holder.
- Page 6 Place the outer supply guide on the supply holder and lock it in place. Unlock the inner supply guide and move it until it touches the supply. Lock it into place. Put the supply tab back. 6-EN...
- Page 7 Guide the labels along the outside edge and into the slot. The printer feeds the supply. Slide the supply lever next to the supply and close it. 10. Close the cover. EN-7...
- Page 8 P r i n t i n g L a b e l s Before you print labels, make sure the time and date are set. Turn on the printer. Press the product button of the label to print. Select the number of labels to print and press Enter. To print a single label, press Enter.
- Page 9 Use the plastic knife to press the L-shaped bar. The platen roller is released. Note: Art is cut-away to show detail. Clean the platen roller and printhead using a cotton swab moistened with isopropyl alcohol. Allow time for the parts to dry. Replace the platen roller.
- Page 10 T r o u b l e s h o o t i n g Problem Action The screen is off or the Unplug the printer from the wall, wait printer is not responding. 10 seconds, plug it back in. The printer does not print, Make sure the printer is turned on has voids, or is too light.