Advertisement
You Will Need
• Module (supplied)
• Two wall anchors and two screws (supplied)
IMPORTANT: The anchors and screws are for mounting
to the wall; do not insert them into the tankless water
heater.
• Tools (field-supplied): Phillips head screwdriver, drill with
bit set, level and pencil
The module's back panel contains two keyhole slots
❶
that support the module. Mark the location of each
slot on the wall with a pencil. The distance between
the two slots is 1.9 in. (48 mm).
Use a level to ensure the slots are even.
❷
Use a power drill to drill pilot holes for the module
screws and anchors.
1.9 in.
(48 mm)
AYLA
ID
Advertisement
